Salam semua bloggers...mlm ni aku ada sket bengang ah...aku ada byk kerja nak print, tetiba printer MP145 aku wat hal plak...kuar error E5 plak...dia kata ink color not recognised...dah lah byk kejer, dia buat hal plak..puas gak aku meng'google' cari solution. mujurlah ramai info2 dari teman2 'hackers' kat alam maya ni...pasni kalau printer canon korang kena error camni, bleh ah cuba apa yg aku nak bagi ni..yang pasti aku try jadi..so xlah kopak duit beli catridge baru..just refill jer sampai akhir hayatnya...hahahaha..
Cara Mereset Printer Canon MP160 , MP145 1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off 1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset 5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160) Error Code :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 – Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error – USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error yang penting cuba jaya bro..jgn takut utk cuba something new..x buat x tau kan...
Labels: Cara Mereset Printer Canon MP145 Dan MP160 |
